Automatic Lids Climbing Feeder + Linear Spindle Capping Machine
FC-ASG+FC-ACG
【APPLICATION】
It is flexible, durable and works with most containers and caps including flat caps, sport caps, metal lids and many others. It’s built on a heavy duty, tight welded, stainless steel frame with anodized aluminum plate construction to provide durability in almost any packaging environment. The modular design lets you start with just a cap tightener and easily add capabilities when you need them.
【FEATURE】
- Power height adjustment
- Comprehensive universal cap chute and escapement
- Hand-wheel operated
- Gripper Belt height and width adjustment
- Variable speed AC motors 4, 6 or 8
- Spindle Wheels Spindle Wheel adjustment knobs, with lock nut hand wheel
- No change parts required for a wide range of containers
- Sanitary 304 stainless steel drive shafts and adjustment support shafts
- Timing belt power transmission for Spindle Wheels
- Bottom screw changeover on Spindle Wheels
- 1/2” aluminum mounting plates and 1/2” hard coat anodized supports on Cap Feed Chute
- Designed for easy integration with most conveyor configurations (sold separately )
- Intrinsically Safe
- Removable dual gripper belts
- Trigger spray cap rails
- Special electrical requirements
Touch Screen
|
|
- 3 Couple of wheels for capping
- Each Wheel is individually adjustable
- The wheels can run in opposite direction to make cap fitting bottles well if necessary.
|
- The two belt height is adjustable to fit different sizes of bottles.
- The capping wheel is soft to prevent caps from damage
- The capping wheel is horizontally adjustable for different sizes of caps
- The capping wheel is vertically adjustable for bottles of different heights
|
|
|
|
9 Motors
6 motors for 6 capping wheels 2 motors for bottle clamping belt 1 motor for machine up and down
Meter Index for Mechanical Adjustment
Two Level Clamping Belts Easy Adjustment between each level
5 Danfoss Frequency Converters Schneider Relay
Cap Sorting Elevator
Cap Sorting Elevator is our most common and economical Sorting System capable handling a wide variety of flat caps up to 110mm. Correctly positioned caps are carried up the universal, cleat belt and blown down into the Capper chute for application. Our Elevator can also be upgraded to handle caps larger than 110mm
|
|
- The angle of cap-falling area is adjustable for different sizes of caps
- One machine suitable for various sizes of caps
- Accuracy up to 99.9%
- High speed, up 220pcs/min
- Speed is adjustable
- Auto-start & stop when caps are insufficient and full
|
【TECHNICAL SPECIFICATION】
Name/Model
|
Automatic Lids Climbing Feeder F-ASG+
Automatic Lids Spindle Machine FC-ACG
|
Capacity
|
0-160
bottles/min (based on bottle & lid size)
|
Lids Size
|
Φ15-70mm
|
Bottle Diameter
|
Φ35-140mm
|
Bottle Height
|
38-300mm
|
Air Supply
|
0.3-0.5Mpa
|
Power Supply
|
AC220V 50/60Hz
|
Power
|
1600W
|
Dimension
|
1080×896×1620mm(FC-ASG)
2000×600×1620mm(FC-ACG)
|
Weight
|
200KG, 400KG
|
Hyaline PC cover position adjustment(As picture 1 below)
The distance between the inner side of hyaline PC cover and the convey chain shall 2-6mm more than the height of the caps.
Picture 1 (Hyaline PC cover position adjustment)
2. Oblique bar adjustment(As picture 2 below)
The distance between the oblique bar and the elevate bar is 1-3mm. The ideal status is there is no rubs between the oblique bar and elevate bar while operation.
Picture 2 (Oblique bar adjustment)